close
Choose Your Site
Global
Social Media
| Quantity: | |
|---|---|
High zinc galvanized steel wire is a type of anti-corrosion steel wire produced via hot-dip galvanizing technology. It uses low-carbon steel wire as the base material, and forms a continuous zinc protective layer on the steel surface through immersion in molten zinc bath. This product is designed for scenarios with higher anti-corrosion requirements than standard galvanized steel wire can meet. The production process follows controlled drawing and heat treatment procedures before galvanizing, to ensure consistent mechanical properties of the base material. The galvanizing process is executed with regulated temperature and immersion duration, to control zinc coating weight and adhesion. This product complies with ASTM A641 and EN 10244-2 standards for hot-dip galvanized steel wire products.
Parameter | Standard Range | Customizable Range |
|---|---|---|
Wire Diameter | 0.8mm – 12mm | Adjusted according to project requirements |
Zinc Coating Weight | 80g/㎡ – 120g/㎡ | Up to 200g/㎡ |
Base Material | Low-carbon steel wire | Selected low-carbon steel grades per request |
Applicable Standards | ASTM A641, EN 10244-2 | Additional standard compliance available upon request |
The zinc coating on this product forms a dense physical barrier between the steel base and external media, isolating contact with moisture, oxygen and corrosive substances. The zinc layer also provides sacrificial anode protection for the base steel when local damage occurs. Under normal outdoor atmospheric conditions, the service life of this product is 2–3 times that of standard commercial galvanized steel wire. Higher coating weight will extend service duration in harsher environments such as high-humidity areas.
Produced through precision drawing and annealing treatment, the wire has uniform diameter and consistent tensile strength. It maintains good toughness and fatigue resistance under long-term load, and is not prone to sudden breakage during normal use. This wire supports common processing operations including cutting, bending, twisting and weaving. It is compatible with downstream production processes for wire mesh, fencing products, binding materials and steel strands.
This product is applied across multiple industrial and commercial scenarios, including outdoor construction fencing, agricultural breeding facilities, highway guardrail components, communication cable reinforcement, and general engineering binding works. It is also used for facility construction in inland areas with moderate corrosive conditions.
For bulk commercial procurement orders, adjustable parameters include wire diameter, zinc coating weight, coil weight and packaging form. Length per coil can be specified according to production or construction needs. Orders with specific coating weight requirements will undergo corresponding weight testing before delivery to confirm compliance with agreed specifications.
Standard production of high zinc galvanized steel wire follows ASTM A641 and EN 10244-2 standards. Compliance with additional regional or project-specific standards can be arranged for bulk orders with prior confirmation.
In neutral outdoor atmospheric environments, this product has a service life 2–3 times that of standard galvanized steel wire with regular zinc coating weight. Actual service duration will vary based on local humidity, salinity and air pollutant levels.
Yes, zinc coating weight can be adjusted within the range of 80g/㎡ to 200g/㎡ for bulk orders. Customized coating requirements will be specified in the order agreement, and corresponding test reports can be provided upon request.
